Illinois Reuse Machineries and Industrial Equipment Newsboad > Tools
> New
> Without Warranty
> Reznor gas duct furnace # hsc-175
Reznor gas duct furnace # hsc-175
The separated combustion furnace is designed for use in building areas with negative pressure and/or extremely dirty or mildly corrosive atmospheres.A specially designed combustion air inlet/vent terminal assembly supplied with HSC Series units requires only a single-building penetration for both exhaust and combustion air.
Standard features include a spark-ignited intermittent safety pilot anda single-stage, 24-volt gas valve. Each unit is equipped with all required limit and safety controls, including a combustion air pressure differential switch to verify proper vent flow before allowing the gas valve to function.Operation of the heater is controlled through field connection to a remote24-volt thermostat.
Reznor s Model HSC Series separated combustion duct furnaces areavailable in two temperature rise ranges. The HSC Models are approved for a temperature rise range of 20 F to 75 F.
Model HSC furnaces are approved for installation downstream of an air conditioning coil. (When used in this application, installing an optional condensate drain on the furnace is strongly recommended. Also recommended, is the selection of optional stainless steel burners and heat exchanger.)
UNIT ALSO COMES WITH COMBUSTION KIT # 205896 WHICH HAS A VALUE OF 325.00. ITS A HORIZONTAL KIT.
