Illinois Reuse Machineries and Industrial Equipment Newsboad > Wisconsin
> Green Bay
> 20 lb. capacity 100% stainless peanut roaster bbq drum
20 lb. capacity 100% stainless peanut roaster bbq drum
Recommended Use: CommercialCapacity: 20 lbs. of PeanutsSize: 13" Diameter End Caps; Cylinder Size 12" Diameter by 26" in Length Hand-Crafted With Pride in the U.S.A.
* Roast 20 lb. in your BBQ with "The Colossus" Stainless Steel Model.
* 100% 18 Gauge Stainless Steel throughout.
* 4 interior fins that run full length of drum.
* Drum has 13" end caps; drum cylinder is 12" diameter by 26" in length.
* Perforated Stainless Steel Cage has 1/8" or 3/16" Diameter Perforated Holes
* Fully welded construction. High strength stainless steel rivets also used in key areas of unit.
* End cap where you put beans in and dump them out has a hinged door for easy access
"The Colossus" only comes in the size referenced above. You must have a BBQ that will fit this big drum and a Heavy Duty rotisserie. (NOTE: If you do intend to use your own rotisserie and you have 4 tines on each prong unit, 2 tines on each prong set can be cut off to accomodate this drum).
Again this drum is designed to handle up to 20 pounds of unroasted nuts. Nuts are put in drum through one of the end caps, part of which is hinged for easy access; other cap is permanently attached.
If you are looking to purchase a grill to accomodate this drum, please use the following guideline:
Grill inside width must be at least: 32"
Grill inside depth must be at least 15"
From where rotisserie rod will reside to inside of closed grill lid must be at least: 7 1/2"
From where rotisserie rod will reside to bottom flame guard (generally the nearest underneath obstruction to rotisserie rod besides grill grate which will be removed for roasting): 7 1/2"
PLEASE BE SURE TO LOOK AT ALL PICTURES OF
DRUM SHOWN AT BOTTOM OF THIS LISTING!
A rotisserie unit you would attach to drum to make it rotate in your BBQ grill is NOT included in this offer. Please note that we fit this drum to your current rotisserie which MUST be Heavy Duty and have 2 tines on each prong set (not 4 tines on each).
Q: I do not have the rotisserie to put the Peanut Roaster on. Do you have suggestions on a good Rotisserie unit for this application?
A: Yes. It MUST be heavy duty, able to support 40+ pounds, with Electric Motor. Email me at ****@peanutroasting.com if you wish to have me provide suggestions on rotisserie and BBQ type.
A: Absolutely not. The Peanut Roasting drum is 100% 18 gauge Stainless Steel metal construction. All welded, with high strength stainless steel rivets used in key areas.
A: Yes in fact it does. The fins (4 of them) are attached inside of the drum, and significantly help in the roasting process.
"The Colossus" shown above in modified Perfect Flame Grill
(motor system & grill not included)
